Running Instructions - swimming pool non chlorine treatment purification specialist

RUNNING INSTRUCTIONS

FOR POOLS

Initially, add the start-up kit to the skimmer box followed by one packet of Aquabrite per 50,000 litres of pool water, but ensure the pH does not exceed 7.4.
Check the level of copper in the water by using the copper test kit provided. When colour is observed of similar intensity to 0.6 ppm of the comparator card the timer/output control may be adjusted to a lower setting.

Check the Aquabrite level using a DPD test kit - follow the instructions printed on every pack. Maintain a total alkalinity reading between 80 and 120 ppm.

It is recommended that the MK5 Ionic Water Purifier should be operated for 1 hour per 10,000 litres of pool water in the summer months supplimented by a dosage of oxidiser every 7 to 14 days depending on usage.

If a heavy bathing load (more than 6 bather hours) is expected on a single day, Aquabrite should be added to the pool at the beginning of the day.
The recommended winter setting is three hours per day supplemented with Aquabrite once per month.

. . . can be obtained from Aquamatics or selected pool shops.

Note: In situations where Aquabrite is unavailable Pool Fresh Plus may be used.
Chlorine may also be used, but always dissolve dry chlorine in a bucket of water before applying to the pool . . . discard the insoluble sludge.

FOR SPAS

Run the purifier for 5 hours per thousand litres of spa water to build up the silver and copper residual. Ensure the pH does not exceed 7.4 and that the filter can operate for that period.

Check the copper level in the water by using the copper
test kit provided.
When colour is observed of similar intensity to 0.6 ppm of the comparator card the timer/output control can be adjusted to a lower setting.

It is recommended that the Ionic Water Purifier should be operated for 3/4 of an hour per 1,000 litres of spa water per day supplemented by a dosage of oxidiser every 1 to 3 days depending on usage.

If a heavy bathing load (more than 6 bather hours) is expected on a single day, an oxidiser should be added to the spa at the beginning of the day.
Add Aquabrite at the rate of 50 grams per 1000 litres.

Check:   1. The copper level in the spa regularly and adjust as necessary to
                   maintain the proper level.
               2. The Aquabrite level as indicated on the pack.

                                                          Please Note:
In situations where Aquabrite is unavailable Pool Fresh Plus may be used.
Never add undiluted chemicals to a spa.

WARRANTY

Aquamatics Pty Ltd. warrants copper/silver IONIC WATER PURIFIER for a period of twelve (12) months from the date of purchase subject to the following conditions.

(A) That failure is not due to negligence, accidents or acts of vandalism.
(B) Does not apply to damage caused by carelessness in installation, misuse or negligence
      in care and maintenance or tampering by unauthorised persons.
(C) That All delivery charges in respect of replacement or repair shall be the obligation of the
     owner.
(D) We shall NOT be responsible for freight charges or loss in transit however caused.
(E) A charge shall be levied for in-situ services.
(F) Aquamatics Pty. Ltd. accepts no responsibilty for damage resulting from the misuse of this      product.

If the above recommendations are followed there is every reason to expect that
you will be delighted with your Ionic Water Purifier for many years to come.
If not please phone or fax us . . .